Why we install them
Most of the ugly, expensive gutter problems we see in Chilliwack and the
Fraser Valley start at a blocked downspout, not along the open run. Once
the outlet is plugged, a full trough overflows at the fascia. That water
can stain siding, soak the soffit, and work its way toward the
foundation.
Baskets go in at that outlet. They don't cover the whole gutter, and
they don't pretend to be maintenance-free. They protect the one point
that turns a messy trough into a drainage failure.
We also install them because the local debris is hard on downspouts.
Cedar needles and moss mat together and pack tightly into a small
opening. In the before photo above, the trough is full of wet needles —
and a plant has even started growing in them. That kind of clog doesn't
just sit there; it funnels straight toward the downspout.
How they work
A gutter basket is a perforated metal insert that sits over the
downspout opening, inside the trough. Water passes through the holes and
down the pipe. Leaves, twigs, cones and clumps of needles stay in the
gutter, where they can dry out and be scooped out on the next cleaning.
That's the whole mechanism. There is no moving part and no filter that
needs replacing. The basket is a strainer at the only exit.
Two things have to be true for it to work. The gutter itself still needs
to be cleaned now and then, so water can actually reach the outlet. And
the basket has to stay clear enough that water can pass through it —
which is a two-minute empty when we're already on the roof, not a new
project.
If you want protection along the entire run, not just at the outlet,
that's a different product. We compare baskets and micro-mesh guards,
including current prices, in our
gutter baskets vs gutter guards
guide.